Description

Afterburner 5 O3 6S HD

Description
Afterburner – The Performance 5-inch by 2RAW and iFlight

The Afterburner is crafted for professional pilots who utilize their FPV drones for cinematic purposes. It’s not built to withstand crashes into concrete but is instead optimized for aerodynamics and balance, enhancing its operational finesse.

Highlight
Compact Design

Afterburner boasts a 20% smaller footprint than typical 5-inch freestyle frames, offering easier transportation, increased agility, and reduced drag, which translates to enhanced overall performance.

Aero Shell

The aero shell manages airflow around and inside the drone. As velocity increases, it functions as an air divider, protecting the flat top plate from direct air impacts. This shell also safeguards the electronics from dirt and moisture, boosting reliability in crucial situations.

Advanced Truss Arms

With a star design and integrated trusses, these arms provide significant stiffness while maintaining a light weight and perfect balance. This design is key to capturing smooth, high-quality footage.

Bottom Mount Battery

Adopting a design inspired by FPV racers,  bottom-mounted battery minimizes drag and clears the top of the drone for mounting a GoPro and ensuring unobstructed GPS visibility. The central placement of the battery keeps the center of gravity near the middle, enhancing agility.

Unobstructed GoPro View

With the GoPro set from 5 to 60 degrees in 16:9 format, there are no visible props in the frame.

DJI O3 HD Air Unit with Low-Latency Digital Transmission

Enjoy up to 10 km of video transmission range with a clear, smooth real-time view, even in areas with interference, as stated by DJI.

4K Stabilized Video with 155° Ultra-Wide Angle

Delivers top-notch imaging performance for captivating visuals that egage viewers, as noted by DJI.

Specifications
Product Name: Afterburner 5 O3 6S HD

– FC: BLITZ F7 Flight Controller
– ESC: BLITZ E55 4-IN-1 2-6S 55A ESC
– Video Transmission: DJI O3 Air Unit
– Geometry: X-Frame
– Frame Size: 210 mm wheelbase
– Motors: XING2 2207 1750KV
– Propellers: GEMFAN 5.1X3.6X3
– Weight: 472±7g (excluding battery)
– Dimensions: 148x148x64mm
– Max Speed: 160km/h
– Max Takeoff Altitude: 7000 m
– Max Hover Time: Approximately 11 minutes with 6S Lipo 1400mAh battery without load
– Operating Temperature: -10° to 40° C
– Antenna: Single
– GNSS: GPS+SBAS+Galileo+QZSS+Glonass

Video Transmission (DJI O3 Air Unit)
– Bandwidth: Max 40 MHz
– Field of View: 155°
– Frequency: 2.400-2.4835 GHz (RX only) / 5.725-5.850 GHz (RX and TX)
– End-to-End Latency:
– With DJI FPV Goggles V2: Up to 28 ms for 810p/120fps; up to 40 ms for 810p/60fps
– With DJI Goggles 2: As low as 30 ms for 1080p/100fps; as low as 40 ms for 1080p/60fps
– Maximum Video Transmission Bitrate: 50 Mbps
– Maximum Range: 10 km (FCC), 2 km (CE), 6 km (SRRC)
– Operating Temperature Range: -10º to 40º C (14° to 104° F)
– Power Input: 7.4-26.4 V

Packing List
1 x Afterburner 5 O3 6S HD BNF
1 x Screw Bag
2 x Battery Strap
2 x Battery Padshttps://shop.iflight.com/Afterburner-5-O3-6S-HD-Pro2139?tracking=limqTmqgLgIJ7L2fCa9tYpvHh3O5g9TQ16BzVlrnxCL3DasrAFaSP8wBt5NUGjKs